ATMEGA32A-AU 8-bit Microcontrollers – MCU 32KB In-sistemu Flash 2.7V – 5.5V
Nkọwa ngwaahịa
| Njirimara ngwaahịa | Uru Njirimara |
| Onye nrụpụta: | Microchip |
| Otu ngwaahịa: | 8-bit Microcontrollers - MCU |
| Isi: | AVR |
| Nha ebe nchekwa mmemme: | 32kB |
| Nha RAM data: | 2kB |
| Ngwungwu / Akpa: | TQFP-44 |
| Ugboro elekere kacha elu: | 16 MHz |
| Mkpebi ADC: | 10 bit |
| Ọnụọgụ nke I/Os: | 32 I/O |
| Voltaji Na-eweta - Obere: | 2.7 V |
| Voltaji na-eweta - Nke kachasị: | 5.5 V |
| Ụdị nrịgo: | SMD/SMT |
| Ogologo ụgbọ ala data: | 8 bit |
| Okpomọkụ arụ ọrụ kacha nta: | - 40 C |
| Okpomọkụ arụ ọrụ kacha: | + 85 C |
| Usoro: | ATmega32A |
| Nkwakọ ngwaahịa: | Tray |
| Akara: | Teknụzụ Microchip |
| Ụdị RAM data: | SRAM |
| Nha ROM data: | 1024 B |
| Ụdị ROM data: | EEPROM |
| Ogologo: | 1 mm |
| Ụdị ihu: | 2- waya, SPI, USART |
| Ogologo: | 10 mm |
| Mmiri nwere mmetụta: | Ee |
| Ọnụọgụ nke Ngụ oge/Ngụkọta: | 3 Ngụ oge |
| Usoro nhazi: | megaAVR |
| Ngwaahịa: | Ndị MCU |
| Ụdị ngwaahịa: | 8-bit Microcontrollers - MCU |
| Ụdị ebe nchekwa mmemme: | Flash |
| Ọnụọgụ ngwugwu ụlọ ọrụ: | 160 |
| ngalaba: | Microcontrollers - MCU |
| Aha ahia: | AVR |
| Obosara | 10 mm |
| Ibu nkeji: | 0,048325 oz |
ATMEGA32A-AU
• Arụmọrụ dị elu, ike dị ala AVR® 8-bit Microcontroller
• RISC Architecture dị elu - 131 Ntuziaka dị ike - Kasị otu elekere mmezu okirikiri - 32 × 8 Nzube Nzube Na-arụ ọrụ Ndị na-edebanye aha - Ọrụ zuru oke - Ruo 16MIPS Ntinye na 16MHz - On-chip 2-cycle Multiplier
• Nnukwu ntachi obi na-adịghị agbanwe agbanwe akụkụ ebe nchekwa - 32Kbytes nke In-System Self-programmable Flash mmemme ebe nchekwa - 1024Bytes EEPROM - 2Kbytes Internal SRAM - Dee / Ehichapụ Cycles: 10,000 Flash / 100,000 EEPROM - Data njide: 85000 afọ. 25°C(1) - Nkebi koodu buut nhọrọ nwere obere mkpọchi nọọrọ onwe ya
• Mmemme n'ime sistemu site na On-chip Boot Programme
• Ezi Ọgụgụ-Mgbe-Dee Ọrụ – Mkpọchi mmemme maka nchekwa ngwanrọ
• JTAG (IEEE std. 1149.1 kwekọrịtara) Interface - Ikike nyocha nke ókèala dị ka JTAG Standard - Akwado On-chip Debug Support - Mmemme nke Flash, EEPROM, Fuses, na Lock Bits site na JTAG Interface
• Nkwado Ọbá akwụkwọ QTouch® - bọtịnụ mmetụ aka ike, ihe mmịfe na wiil - nnweta QTouch na QMatrix™ - Ruo ọwa ọgụgụ isi 64.
• Akụkụ dị n'akụkụ - Abụọ 8-bit Timer / Counters nwere iche iche Prescalers na atụnyere ụdịdị - Otu 16-bit Timer / Counter na iche iche Prescaler, Tulee Mode, na Capture Mode - Real Time Counter with Separate Oscillator - Anọ PWM Channels - 8-channel, 10-bit ADC
• 8 Ọwa nwere otu ngwụcha
• Ọwa 7 dị iche na ngwugwu TQFP naanị
• Ọwa 2 dị iche iche nwere uru mmemme na 1x, 10x, ma ọ bụ 200x - Byte-oriented Two-waya Serial Interface – Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with iche iche On-chip Oscillator – On-chip Analog Comparator
• Atụmatụ Microcontroller pụrụ iche - Ntọgharị ike na mmemme Brown-out Detection - Internal Calibrated RC Oscillator - Mpụga na mpụga isi mmalite - Ụdị ụra isii: Arụghị ọrụ, Mbelata mkpọtụ ADC, Nchekwa ike, Ike-ala, Njikere na Njikere gbatịpụrụ.
• I/O na ngwugwu - 32 ahịrị I/O nwere ike ime - 40-pin PDIP, 44-edu ndú TQFP, na 44-pad QFN/MLF
• Voltaji na-arụ ọrụ - 2.7V - 5.5V
• Ọsọ ọsọ – 0 – 16MHz
• Oriri ike na 1MHz, 3V, 25°C - Na-arụ ọrụ: 0.6mA - Ọnọdụ na-adịghị arụ ọrụ: 0.2mA - Ụdị mgbada: <1µA
