S9KEAZN64AVLCR ARM Microcontrollers – MCU KINETIS E Series 64K FLASH 4K RAM 40MHz 32LQFP
♠ Nkọwa ngwaahịa
| Njirimara ngwaahịa | Uru Njirimara |
| Onye nrụpụta: | NXP |
| Otu ngwaahịa: | ARM Microcontrollers - MCU |
| Usoro: | KEA64 |
| Ụdị nrịgo: | SMD/SMT |
| Ngwungwu / Akpa: | LQFP-32 |
| Isi: | ARM Cortex M0+ |
| Nha ebe nchekwa mmemme: | 64kB |
| Ogologo ụgbọ ala data: | 32 bit |
| Mkpebi ADC: | 12 bit |
| Ugboro elekere kacha elu: | 40 MHz |
| Ọnụọgụ nke I/Os: | 28 I/O |
| Nha RAM data: | 4kB |
| Voltaji Na-eweta - Obere: | 2.7 V |
| Voltaji na-eweta - Nke kachasị: | 5.5 V |
| Okpomọkụ arụ ọrụ kacha nta: | - 40 C |
| Okpomọkụ arụ ọrụ kacha: | + 105 C |
| Nkwakọ ngwaahịa: | Reel |
| Voltaji na-eweta Analog: | 2.7 V ruo 5.5 V |
| Akara: | NXP Semiconductors |
| Mkpebi DAC: | 6 bit |
| Ụdị RAM data: | SRAM |
| Nha ROM data: | 256 B |
| Ụdị ROM data: | EEPROM |
| Ụdị ihu: | I2C, SPI, UART |
| Mmiri nwere mmetụta: | Ee |
| Ọnụọgụ nke ọwa ADC: | Ọwa 16 |
| Ngwaahịa: | MCU |
| Ụdị ngwaahịa: | ARM Microcontrollers - MCU |
| Ụdị ebe nchekwa mmemme: | Flash |
| Ọnụọgụ ngwugwu ụlọ ọrụ: | 2000 |
| ngalaba: | Microcontrollers - MCU |
| Oge nche nche: | Oge nche nche |
| Akụkụ # Aha: | 935324986528 |
• Njirimara ọrụ
- Oke voltaji: 2.7 ruo 5.5 V
- Oke voltaji dee Flash: 2.7 ruo 5.5 V
- Okpomọkụ dị nso (ambient): -40 ruo 125°C
• Arụmọrụ
- Ihe ruru 40 MHz Arm® Cortex-M0+ isi na ihe ruru elekere ụgbọ ala 20 MHz
– Otu okirikiri 32-bit x 32-bit multiplier
– Otu okirikiri I/O ohere ọdụ ụgbọ mmiri
• Ncheta na oghere ebe nchekwa
- Ihe ruru 64 KB flash
- Ruo 256 B EEPROM
- Ihe ruru 4 KB RAM
• Elekere
- Oscillator (OSC) - na-akwado 32.768 kHz crystal ma ọ bụ 4 MHz kristal 20 MHz ma ọ bụ seramiiki resonator; nhọrọ nke obere ike ma ọ bụ nnukwu uru oscillators
- Isi mmalite elekere (ICS) - FLL dị n'ime ya na ntinye aka n'ime ma ọ bụ mpụga, 31.25 kHz pretrimmed ntinye aka maka sistemụ 40 MHz na elekere isi.
- 1 kHz oscillator dị ala (LPO)
• Sistemụ mpụta
- Modul njikwa ike (PMC) nwere ụdị ike atọ: Gbaa, Chere, Kwụsị
- Nchọpụta obere voltaji (LVD) na nrụpụta ma ọ bụ kwụsịtụ, isi ihe njem a na-ahọrọ
- Watchdog nwere isi mmalite elekere (WDOG)
- Modul nlele redundancy cyclic programmable (CRC)
- Serial waya debug interface (SWD)
- Injin njikwa Bit (BME)
• modul nchekwa na iguzosi ike n'ezi ihe
- 64-bit nọmba njirimara pụrụ iche (ID) kwa mgbawa
• Ngwa igwe mmadụ-igwe
- Ruo 57 ntinye/ mmepụta ihe n'ozuzu (GPIO)
- Ruo 22 ntinye/ mmepụta ihe n'ozuzu (GPIO)
- Ruo 14 ntinye / mmepụta ihe n'ozuzu (GPIO)
- Modul nkwụsị nke keyboard abụọ ruo 8-bit (KBI)
- nkwụsị nke mpụga (IRQ)
• Modul analog
- Otu ihe ruru 16-ọwa 12-bit SAR ADC, na-arụ ọrụ na ọnọdụ Kwụsị, ihe mkpali ngwaike nhọrọ (ADC)
- Ndị ntụnyere analog abụọ nwere 6-bit DAC na ntinye ntụaka mmemme (ACMP)
• Ngụ oge
- Otu ọwa 6 FlexTimer/PWM (FTM)
- Ọwa abụọ FlexTimer/PWM (FTM)
- Otu oge nkwụsịtụ oge ọwa abụọ (PIT)
- Otu elekere ozugbo (RTC)
• Nkwukọrịta ozi
- modulu SPI abụọ (SPI)
- Ihe ruru modul UART atọ (UART)
- Otu modul I2C (I2C)
• Nhọrọ ngwugwu
- 64-pin LQFP
- 32-pin LQFP
