STM32F411RET6 ARM Microcontrollers MCU STM32 Dyn Eff MCU 512K 100 MHz CPU

Nkọwa dị mkpirikpi:

Ndị nrụpụta: STMicroelectronics
Udi ngwaahịa: agbakwunyere - Microcontrollers
Akwụkwọ data:STM32F411RET6
Nkọwa: IC MCU 32BIT 512KB FLASH 64LQFP
Ọkwa RoHS: RoHS kwadoro


Nkọwa ngwaahịa

Atụmatụ

Mkpado ngwaahịa

♠ Nkọwa ngwaahịa

Njirimara ngwaahịa Uru Njirimara
Onye nrụpụta: STMicroelectronics
Otu ngwaahịa: ARM Microcontrollers - MCU
RoHS: Nkọwa
Usoro: STM32F411RE
Ụdị nrịgo: SMD/SMT
Ngwungwu / Akpa: LQFP-64
Isi: ARM Cortex M4
Nha ebe nchekwa mmemme: 512kB
Ogologo ụgbọ ala data: 32 bit
Mkpebi ADC: 12 bit
Ugboro elekere kacha elu: 100 MHz
Ọnụọgụ nke I/Os: 50 I/O
Nha RAM data: 128kB
Voltaji Na-eweta - Obere: 1.7 V
Voltaji na-eweta - Nke kachasị: 3.6 V
Okpomọkụ arụ ọrụ kacha nta: - 40 C
Okpomọkụ arụ ọrụ kacha: + 85 C
Nkwakọ ngwaahịa: Tray
Voltaji na-eweta Analog: 1.7 V ruo 3.6 V
Akara: STMicroelectronics
Ụdị RAM data: RAM
Ụdị ihu: I2C, SPI, USART, USB
Ogologo: 10 mm
Mmiri nwere mmetụta: Ee
Ọnụọgụ nke ọwa ADC: Ọwa 16
Usoro nhazi: STM32F411xE
Ngwaahịa: MCU+FPU
Ụdị ngwaahịa: ARM Microcontrollers - MCU
Ụdị ebe nchekwa mmemme: Flash
Ọnụọgụ ngwugwu ụlọ ọrụ: 960
ngalaba: Microcontrollers - MCU
Aha ahia: STM32
Oge nche nche: Oge nche nche
Obosara 10 mm
Ibu nkeji: 0.012088 oz

♠ Arm® Cortex®-M4 32b MCU+FPU, 125 DMIPS, 512KB Flash, 128KB RAM, USB OTG FS, 11 TIMs, 1 ADC, 13 comm.interfaces

Ngwa STM32F411XC/XE dabere na Arm® Cortex® -M4 32-arụ ọrụ dị elu.bit RISC isi na-arụ ọrụ na ugboro ruru 100 MHz.Cortex®-M4 isi atụmatụ aOtu nkenke na-ese n'elu mmiri (FPU) nke na-akwado ntuziaka nhazi data nhazi otu Arm na ụdị data niile.Ọ na-emejuputa usoro ntụziaka DSP zuru ezu naOtu nchekwa nchekwa (MPU) nke na-eme ka nchekwa ngwa dịkwuo elu.

STM32F411xC/xE bụ nke ahịrị ngwaahịa STM32 Dynamic Efficiency™ (ya nangwaahịa na-ejikọta ike arụmọrụ, arụmọrụ na ntinye) mgbe ị na-agbakwunye ọhụrụatụmatụ ọhụrụ akpọrọ Batch Acquisition Mode (BAM) na-enye ohere ịchekwa ike karịaoriri n'oge data batching.

STM32F411xC/xE na-agụnye ncheta agbakwunyere ọsọ ọsọ (ruo 512 Kbytes nkeEbe nchekwa Flash, 128 Kbytes nke SRAM), yana ọtụtụ ụdị nkwalite I/Os naakụkụ ejikọrọ na ụgbọ ala APB abụọ, ụgbọ ala AHB abụọ na matriks ụgbọ ala 32-bit multi-AHB.

Ngwa niile na-enye otu 12-bit ADC, obere ike RTC, ihe ngụ oge 16-bit izugbe isii.gụnyere otu ngụ oge PWM maka njikwa moto, ihe ngụ oge 32-bit izugbe abụọ.Ha kwaatụmatụ ọkọlọtọ na elu nkwurịta okwu interfaces.

• Ruo I2C atọ

• SPI ise

• I2S ise nke abụọ n'ime ha jupụtara duplex.Iji nweta izi ezi klas ọdịyo, I2SEnwere ike imechi oghere site na PLL ọdịyo dị n'ime raara onwe ya nye ma ọ bụ site na elekere mpụgaikwe ka mmekọrịta.

• USART atọ

• interface SDIO

• USB 2.0 OTG zuru ọsọ interfaceSTM32F411xC/xE na-arụ ọrụ n'ime -40 ruo + 125 Celsius C okpomọkụ sitere na 1.7 (PDR)Gbanyụọ) ruo 3.6 V ike ọkọnọ.Usoro zuru oke nke ọnọdụ nchekwa ike na-enye ohere imewe yanke obere ike ngwa.

Atụmatụ ndị a na-eme ka STM32F411xC/xE microcontrollers dabara maka ụdị dịgasị iche ichengwa:

• Mbanye moto na njikwa ngwa

• akụrụngwa ahụike

• Ngwa ụlọ ọrụ: PLC, inverters, sekit breakers

• Ndị nbipute, na nyocha

• Sistemụ mkpu, intercom vidiyo, na HVAC

• Ngwa ọdịyo ụlọ

• Ebe ihe mmetụta ekwentị mkpanaaka


  • Nke gara aga:
  • Osote:

  • Ahịrị arụmọrụ dị ike nwere BAM (BatchỤdị nnweta)
    – 1.7 V ka 3.6 V ike ọkọnọ
    – – 40°C ka 85/105/125°C okpomọkụ nso

    • Isi: Arm® 32-bit Cortex®-M4 CPU nwere FPU,Ihe na-eme ngwa ngwa ozugbo (ARTAccelerator™) na-enye ohere igbu oge 0-echere steetisite na ebe nchekwa Flash, ugboro ruo 100 MHz,ngalaba nchekwa nchekwa,125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1),na ntuziaka DSP

    • Ncheta
    - Ihe ruru 512 Kbytes nke ebe nchekwa Flash
    - 128 Kbytes nke SRAM

    • Elekere, tọgharịa na njikwa ọkọnọ
    – 1.7 V ka 3.6 V ngwa ọkọnọ na I/Os
    - POR, PDR, PVD na BOR
    - 4 ruo 26 MHz oscillator kristal
    – Ime ụlọ ọrụ 16 MHz RC emechiri emechi
    - 32 kHz oscillator maka RTC na nhazi nhazi
    - 32 kHz RC dị n'ime ya na nhazi nhazi

    • Oriri ike
    - Gbaa ọsọ: 100 µA / MHz (mgbepụ anya)
    - Kwụsị (Flash na ọnọdụ nkwụsị, ịkpọte ngwa ngwaoge): 42 µA Ụdị @ 25C;65 µA max
    @25 Celsius C
    - Kwụsị (Flash na ọnọdụ ala ike dị omimi,oge ịkpọte ngwa ngwa): gbadata 9 µA @ 25 Celsius;28µA kacha @25 Celsius
    - Njikere: 1.8 µA @ 25 Celsius C / 1.7 V enweghịRTC;11 µA @ 85 Celsius C @ 1.7 V
    – VBAT ọkọnọ maka RTC: 1 µA @25 Celsius

    • 1×12-bit, 2.4 MSPS A/D ntụgharị: ruo 16ọwa

    • Ebumnuche ebumnuche DMA: 16-iyi DMAndị na-ahụ maka FIFO na nkwado mgbawa

    • Ruo oge 11: ruo isii 16-bit, abụọ 32-bitoge ruru 100 MHz, nke ọ bụla nwere ihe ruru anọIC/OC/PWM ma ọ bụ counter pulse na quadraturentinye ntinye koodu (mmụba), onye nche abụọoge (nnwere onwe na windo) na aSysTick ngụ oge

    • Ụdị nbipu
    – Serial waya debug (SWD) & JTAGinterfaces
    – Cortex®-M4 agbakwunyere trace Macrocell™

    • Ruo 81 ọdụ ụgbọ mmiri I/O nwere ike nkwụsịtụ
    - Ruo 78 ngwa ngwa I/Os ruo 100 MHz
    - Ruo 77 5 V-anagide I/Os

    • Ruo 13 nzikọrịta ozi
    - Ihe ruru oghere 3 x I2C (SMBus / PMBus)
    - Ruo USART 3 (2 x 12.5 Mbit / s,1 x 6.25 Mbit/s), ISO 7816 interface, LIN,
    IrDA, njikwa modem)
    - Ruo 5 SPI / I2Ss (ruo 50 Mbit / s, SPI ma ọ bụI2S audio protocol), SPI2 na SPI3 nweremuxed zuru-duplex I2S iji nweta ọdịyoklaasị ziri ezi site n'ime ọdịyo PLL ma ọ bụelekere mpụga
    - interface SDIO (SD / MMC / eMMC)
    - Njikọ dị elu: USB 2.0 zuru okengwaọrụ / onye ọbịa / OTG njikwa nwere on-chipPHY

    • Ngalaba mgbako CRC

    • NJ pụrụ iche 96-bit

    • RTC: izi ezi nke abụọ, kalenda ngwaike

    • ngwugwu niile (WLCSP49, LQFP64/100,UFQFPN48, UFBGA100) bụ ECOPACK®2

    Ngwaahịa ndị emetụtara