SPC5675KFF0MMS2 32bit Microcontrollers MCU 2MFlash 512KSRAM EBI
♠ Nkọwa ngwaahịa
| Njirimara ngwaahịa | Uru Njirimara |
| Onye nrụpụta: | NXP |
| Otu ngwaahịa: | 32-bit Microcontrollers - MCU |
| RoHS: | Nkọwa |
| Usoro: | MPC5675K |
| Ụdị nrịgo: | SMD/SMT |
| Ngwungwu / Akpa: | BGA-473 |
| Isi: | e200z7d |
| Nha ebe nchekwa mmemme: | 2 MB |
| Nha RAM data: | 512kB |
| Ogologo ụgbọ ala data: | 32 bit |
| Mkpebi ADC: | 12 bit |
| Ugboro elekere kacha elu: | 180 MHz |
| Voltaji Na-eweta - Obere: | 1.8 V |
| Voltaji na-eweta - Nke kachasị: | 3.3 V |
| Okpomọkụ arụ ọrụ kacha nta: | - 40 C |
| Okpomọkụ arụ ọrụ kacha: | + 125 C |
| ntozu: | AEC-Q100 |
| Nkwakọ ngwaahịa: | Tray |
| Voltaji na-eweta Analog: | 3.3V/5V |
| Akara: | NXP Semiconductors |
| Ụdị RAM data: | SRAM |
| Voltaji I/O: | 3.3 V |
| Mmiri nwere mmetụta: | Ee |
| Usoro nhazi: | MPC567xK |
| Ngwaahịa: | MCU |
| Ụdị ngwaahịa: | 32-bit Microcontrollers - MCU |
| Ụdị ebe nchekwa mmemme: | Flash |
| Ọnụọgụ ngwugwu ụlọ ọrụ: | 420 |
| ngalaba: | Microcontrollers - MCU |
| Oge nche nche: | Oge nche nche |
| Akụkụ # Aha: | 935310927557 |
| Ibu nkeji: | 0.057260 oz |
♠ MPC5675K Microcontroller
Ihe microcontroller MPC5675K, ihe ngwọta SafeAssure, bụ a32-bit agbakwunyere njikwa emebere maka ọkwọ ụgbọ ala dị eluusoro enyemaka nwere RADAR, imaging CMOS, LIDARna ultrasonic sensọ, na otutu 3-phase moto akaraNgwa dị ka ọ dị na ụgbọ ala eletrik ngwakọ (HEV) inụgbọ ala na elu okpomọkụ ụlọ ọrụ ngwa.
Onye otu NXP Semiconductor's MPC5500/5600 ezinụlọ,o nwere Akwụkwọ E nke na-akwado ike Architectureisi teknụzụ nwere mgbanwe ogologo ogologo (VLE).Nke aisi na-akwado ihe owuwu ike agbakwunyereAtiya, na ọ bụ 100 percent njirimara mode dakọtara nambụ Power PC™ onye ọrụ ntuziaka set architecture (UISA).Ọ na-enye arụmọrụ sistemu ihe ruru okpukpu anọ karịa nke yaMPC5561 bu ụzọ, mgbe ị na-ewetara gị ntụkwasị obi namaara nke teknụzụ Power Architecture egosipụtara.
Ngwa ngwaike na ngwanrọ zuru okengwá ọrụ mmepe dị iji nyere aka mee ka ọ dị mfe na ọsọ ọsọnhazi usoro.Nkwado mmepe dị site nandị na-ere ngwá ọrụ na-eduga na-enye ndị nchịkọta, debuggers nagburugburu mmepe ịme anwansị.
• E200z7d dual core na-arụ ọrụ dị elu
- 32-bit Power Architecture teknụzụ CPU
- Ruo 180 MHz isi ugboro
- Isi okwu abụọ
- Ngbanwe ogologo dị iche iche (VLE)
- Ngalaba njikwa ebe nchekwa (MMU) nwere ndenye 64
- cache ntuziaka 16 KB na cache data 16 KB
• Ebe nchekwa dị
- Ihe ruru 2 MB ebe nchekwa flash na ECC
- 64KB data flash ebe nchekwa na ECC
- Ruo 512 KB on-chip SRAM nwere ECC
• Echiche nchekwa ọhụrụ SIL3/ASILD: LockStep mode na nchebe adịghị mma
- Sphere nke replication (SoR) maka isi akụrụngwa
- nkeji nlele ugboro ugboro na nsonaazụ nke SoR ejikọrọ na FCCU
- Ngalaba nchịkọta na njikwa mmejọ (FCCU)
- Nnwale nke onwe nke oge buut maka ebe nchekwa (MBIST) na mgbagha (LBIST) sitere na ngwaike.
- Nnwale nke onwe nke oge buut maka ADC na ebe nchekwa flash
- Ngụ oge nchekwa emelitere nchekwa
- Silicon mkpụrụ (anwụ anwụ) ihe mmetụta okpomọkụ
- Nkwụsị enweghị mkpuchi (NMI)
- Ngalaba nchekwa nchekwa mpaghara 16 (MPU)
- Ngalaba nlekota elekere (CMU)
- Ngalaba njikwa ike (PMU)
- nkeji nlele redundancy cyclic (CRC).
• Ụdị ndakọrịta emebiela maka ịrụ ọrụ dị elu nke cores oyiri
• Nexus Class 3+ interface
• nkwụsị
- Onye njikwa nkwụsị ụzọ 16 emegharịrị
• GPIO n'otu n'otu nwere ike ịhazi dị ka ntinye, mmepụta, ma ọ bụ ọrụ pụrụ iche
• nkeji eTimer izugbe 3 (ọwa 6 nke ọ bụla)
• nkeji 3 FlexPWM nwere ọwa 16-bit anọ kwa modul
• Njikọ njikọ
- 4 LINFlex modul
- modul 3 DSPI nwere ọgbọ nhọrọ mgbawa akpaka
- 4 FlexCAN interfaces (2.0B Active) nwere ihe ozi 32
- FlexRay modul (V2.1) nwere ọwa abụọ, ihe ruru 128 ozi ihe yana ruo 10 Mbit / s
- Onye njikwa Ethernet ngwa ngwa (FEC)
— 3 I2C modul
• Ndị ntụgharị analọgụ-na-dijitalụ anọ 12-bit (ADCs)
- 22 ọwa ntinye
- Ngalaba na-akpalite obe mmemme (CTU) iji mekọrịta ntụgharị ADC na ngụ oge na PWM
• interface ụgbọ ala mpụga
• 16-bit mpụga DDR ebe nchekwa njikwa
• Ntụgharị dijitalụ yiri (PDI)
• On-chip CAN/UART bootstrap loader
• Ike ịrụ ọrụ na otu 3.3 V voltaji ọkọnọ
- 3.3 V-naanị modul: I/O, oscillators, flash memory
- 3.3 V ma ọ bụ 5 V modul: ADCs, na-enye VREG dị n'ime
— 1.8–3.3 V nso nsonye: DRAM/PDI
• Oke ikpo ọkụ na-arụ ọrụ -40 ruo 150 Celsius
